Switchboard capacity checks
Solar, battery and electrical supply support
Solar & Battery Electrical Support Sydney
Evaready Electrical helps assess the electrical side of solar and battery projects, including switchboard capacity, consumer mains, metering, dedicated circuits, isolators, backup-circuit planning and supply upgrades across Sydney and surrounding regions.
Our licensed electricians confirm the electrical work and any system-specific solar or battery accreditation needed for the job. Design, installation, network approval, manufacturer commissioning and incentive eligibility are distinct requirements; none is assumed from an electrical licence alone.
Solar panels and batteries can remain energised after the mains supply is off. Do not open, reset or work on damaged equipment. For smoke, fire, unusual battery heat or immediate danger, move clear, keep others away and call Triple Zero (000).
Electrical planning
Electrical checks before solar or battery work
Before solar or battery work proceeds, Evaready can review switchboard capacity, electrical load, consumer mains, metering, dedicated circuits, isolators and supply requirements. The electrical scope and any system-specific authorisations are confirmed before the work is accepted.
Electrical load-capacity checks
Consumer mains review
Metering and Level 2 enquiries
Battery-ready switchboard upgrades
Dedicated circuits
Backup-circuit planning
Solar and battery isolator electrical work within verified scope
Electrical fault triage
Existing-system electrical checks
Point-of-attachment or supply review
EV charger load planning
System-specific installation scope and authorisation review
From assessment to commissioning.
Assessment and system requirements
Start with how the property uses electricity, existing solar or battery equipment, proposed loads and the intended outcome. We assess accessible switchboard and supply conditions. Roof structure, equipment location, fire-safety separation and access can affect the final design and may need additional assessment.
Solar and battery installation boundaries
The agreed scope identifies design, equipment supply, electrical installation, required accreditation, metering and network connection steps. Solar and battery accreditation categories are not interchangeable. Eligibility for an incentive also depends on the equipment and scheme requirements; a quotation is not approval.
Backup is a specific function
Not every grid-connected system operates during a blackout. Backup depends on the inverter, battery, switching arrangement, selected circuits and available stored energy. Agree the essential loads and expected operating limits rather than assuming whole-home backup or an unlimited duration.
Commissioning and handover
The required electrical tests, manufacturer commissioning and connection steps are identified before handover. The owner needs clear isolation and fault guidance, operating limits and the applicable records. Export settings, future savings, battery life and third-party approval times cannot be guaranteed by an electrical preparation visit.
Before adding solar or batteries
Check the electrical supply, switchboard and capacity first.
Solar and battery planning can involve more than the panels or battery unit. The switchboard, consumer mains, metering, access and connected loads may need review before the final scope is confirmed.
Switchboard condition
Safety-switch and RCBO protection
Existing electrical load
Consumer mains
Metering
Available space
Backup circuits
Three-phase supply
Network or retailer requirements
Access and equipment location
Keep clear of unsafe equipment
Electrical symptoms around solar or batteries should be treated carefully.
Electrical symptoms such as repeated tripping, heat, burning smells, damaged isolators or visible wiring damage should be assessed promptly. Inverter error codes or battery-system faults may also require the original manufacturer or an appropriately accredited specialist.
Do not open, reset or work on batteries, inverters or switchboards yourself. For smoke, fire, unusual battery heat or immediate danger, move clear, keep others away and call Triple Zero (000) first. Arrange electrical assessment only after immediate danger is controlled.
Heat around solar, battery, inverter, isolator or switchboard equipment
Smoke or burning smell
Sparking or exposed wiring
Damaged isolator or visible electrical damage
Water reaching electrical equipment
Electric-shock risk
Repeated tripping linked to solar or battery equipment
Partial or complete power loss
Quote checklist
What to send for a solar or battery electrical quote.
Start with notes about the proposed work and equipment. Safe photos are optional: keep covers closed and do not climb or approach a hazard. Share necessary supply documents privately, with unrelated account information removed.
Property address
Electricity bill or supply details if available
Switchboard photos
Meter-box photos
Existing inverter or battery model labels
Proposed solar or battery details
EV charger or air-conditioning plans
Backup-circuit requirements
Access and equipment-location photos
Defect notices or network paperwork
Whether the project is new, replacement, expansion or fault investigation
Related services
Electrical services often connected to solar and battery planning.
Scope and process
Clear scope before work starts.
Our licensed electricians confirm the electrical work and any system-specific solar or battery accreditation needed for the job. Design, installation, network approval, manufacturer commissioning and incentive eligibility are distinct requirements; none is assumed from an electrical licence alone.
For fire, smoke or immediate danger, move to safety and call Triple Zero (000). Keep clear of damaged electrical equipment; arrange electrical assessment after the immediate risk is controlled.
Confirm the work
Our licensed electricians confirm the work and the specialist authorisations relevant to the accepted scope before starting.
Explain the findings
The assessment identifies accessible conditions, necessary work and anything that needs further investigation.
Agree the next step
A quote request does not confirm attendance, third-party approval or a completed booking. Scope and timing are confirmed separately.
Test and hand over
Completed work is checked within the agreed scope, with required records and any remaining limitations explained.
Useful first details
- Suburb, property type and the reason for the enquiry
- Equipment details or a summary of relevant instructions
- Whether the work is planned or there is an unsafe fault
Keep the enquiry safe
- Notes are enough to start; safe photos are optional
- Do not open covers, climb or approach electrical hazards
- Do not send passwords, access codes or unrelated private documents
FAQ
Solar and battery electrical support questions.
Can Evaready help with solar and batteries?
Our licensed electricians assess the electrical side of solar and battery projects, including switchboard capacity, consumer mains, metering, load checks, isolation and circuit needs. Any design, installation or commissioning work is accepted only after the required system-specific scope and authorisations are confirmed.
Do I need a switchboard upgrade before solar or a battery?
Some properties may need switchboard capacity, circuit protection or space reviewed before solar or battery work proceeds. Evaready can check the electrical side and explain whether an upgrade should be quoted.
Can solar or batteries require a consumer mains upgrade?
Yes, some projects may involve supply capacity, consumer mains, metering or Level 2 considerations. Evaready can review the electrical scope and explain the next action within the relevant network and job requirements.
Can you check electrical load capacity?
Yes. Evaready can review electrical load capacity for planned solar, battery, EV charging, air-conditioning or other larger electrical loads so the switchboard and supply side can be considered before work proceeds.
Can batteries provide blackout backup?
Some battery systems may support backup circuits, but the exact capability depends on the battery system, inverter, wiring, switchboard configuration and specialist design. Evaready can help with electrical-side planning without promising backup performance.
Can you investigate a tripping solar circuit?
Do not open or reset the system. For smoke, fire, unusual battery heat or immediate danger, move clear, keep others away and call Triple Zero (000) first. Once immediate danger is controlled, Evaready can assess electrical symptoms such as repeated tripping or damaged isolators. Inverter error codes or battery-system faults may also require the manufacturer or an appropriately accredited specialist.
What photos should I send?
Start with the suburb, proposed work, existing equipment models and essential backup loads. Safe accessible photos are optional; do not open covers, climb or approach damaged equipment. Share necessary supply paperwork privately with unrelated account details removed, and do not send passwords or access codes.
Do you guarantee network approval?
No. Network, retailer and manufacturer requirements depend on the relevant third parties and equipment. Evaready can review the electrical scope and help identify what may need to be considered before work proceeds.
Do I need an accredited solar or battery installer?
The electrical licence, relevant solar or battery accreditation, network rules and manufacturer requirements must match the actual work. Accreditation requirements can also affect incentive eligibility. Confirm the design, installation and commissioning scope before accepting a complete system quote.
Can EV charging be planned with solar and batteries?
Yes. EV charger load planning can be reviewed alongside switchboard capacity, consumer mains, metering and future solar or battery intentions so the electrical side is planned more clearly.
Solar & Batteries