Keep clear of the affected area.
Move people away from exposed wires, smoke, burning smells, sparking, wet fittings or damaged electrical equipment.
Electrical fault guide
Safety Switch Keeps Tripping
A safety switch that keeps tripping can indicate electrical leakage from wiring, an appliance or moisture. Stop using the affected equipment and do not keep resetting it. For fire, serious injury or immediate danger, keep clear and call Triple Zero (000) first. Seek medical advice after any electric shock, even if you feel well.
NSW Licence 398937C
Open 24/7 for urgent electrical fault calls
Fault finding and testing
Photos help planned quotes
When to call first
Treat an active or unsafe fault as a phone-first job.
If the issue is happening now, feels unsafe or involves heat, smoke, sparking, shock risk, water damage or power loss, call first so the risk can be triaged. For planned inspection or repair, send photos and job details through the quote form.
Do not touch damaged, wet or live equipment.
Avoid switchboards, outlets, appliances, service equipment and fittings that look damaged, wet, hot or unsafe.
Call emergency services first for life-threatening danger.
For fire, electric shock injury, fallen powerlines or immediate danger to people, keep clear and call 000 first.
What it can mean
Do not guess with electrical faults.
The cause can sit at the fitting, circuit, appliance, switchboard or supply. Proper testing keeps the next action clear.
An RCD safety switch detects current leaking away from its intended path. A circuit breaker responds to overcurrent; a combined device provides both functions. A trip alone does not identify which fault is present.
Moisture in an outdoor fitting, deteriorated cable insulation or a faulty appliance can cause leakage. The timing of a trip may help narrow the investigation, but is not a diagnosis.
Our licensed electricians identify the affected circuit, inspect accessible equipment and test the wiring and protective device under safe isolation. Intermittent faults may need further investigation if they are not present during the visit.
The next step may be repairing damaged wiring or a fitting, keeping an unsafe appliance disconnected, or replacing a defective protective device. A switchboard upgrade is not automatically the answer to a recurring trip.
Check safely
What to do before calling.
Only check what is safe, dry and obvious. If the fault involves heat, water, smoke, sparking or exposed parts, keep clear and call first.
From a safe place, note which lights or appliances stopped working. Do not move between outlets to recreate the trip or test a suspect appliance yourself.
Keep people away from wet, damaged, hot or sparking equipment. Do not touch fittings to check their temperature or remove switchboard covers.
Do not reset repeatedly, hold a switch on or defeat its protection. A circuit staying on later does not prove the original fault has gone.
After emergency risks are addressed, contact our licensed electricians for recurring trips. If essential medical equipment loses supply, follow its emergency plan and call 000 for immediate danger to the person.
Send useful details
A few photos can make the quote faster.
For non-urgent work, open the secure booking form to send your address, photos and job notes. Evaready Electrical can then review the job and reply with the next action.
Only if already safe, a photo showing the visible switch labels from outside the closed switchboard. Never approach a hazard, remove a cover or delay emergency help for photos.
Which rooms, lights or appliances stopped working, and whether one or several devices tripped. Report what you already observed without recreating the fault.
When the trips occurred and whether rain, outdoor equipment, a particular appliance or recent electrical work coincided with them.
Your suburb and a way to contact you through the quote form for non-urgent work. Explain any essential equipment affected when calling; do not include private access codes in photos.
FAQ
Common questions.
Is a tripping safety switch urgent?
Recurring trips need assessment. Keep clear of smoke, sparking, heat or wet equipment. For fire or immediate danger call 000 first; a quote form is not emergency assistance. Leave the affected circuit off until the fault is assessed.
Can I keep resetting the safety switch?
No. Do not keep re-energising a circuit with an unresolved fault, hold the switch on or bypass it. Our licensed electricians can test the circuit and device instead of relying on trial-and-error resets.
Can rain make an RCD trip?
Yes. Water entering a fitting or damaged equipment may cause leakage, but rain alone does not prove the source. Keep clear of wet equipment and arrange testing; do not open outdoor fittings or use them again simply because they have dried.
Related help